Remember. It doesn't matter if you have years of practical, first hand experience. The guy in a chair in a basement is always going to be correct, and smarter than you.

I love when people try to tell professionals what they're doing wrong...

I wouldn't survive an hour on the job. Much respect.

Mad respect for these dudes. That shit looks scary af. I hate heights

Bruh you know you’re a professional when the log that falls off the tree is not only perfectly sized but also lines up with the other logs on the ground and does your taxes on the way down.

My hats off to anyone who does this for a living! Much respect!

I've been sitting on the couch eating Cheetos and drinking beer which qualifies me to tell you what you're doing wrong on your cut. 🤣

Total respect for the men who have the talent and courage to perform the dangerous jobs. He is an everyday hero!

As a retired Arborist. You did absolutely stunning work.

I commend these guys. Probably another day in the office for them, but this kind of work looks absolutely insane.

POV: Your looking for a comment of someone telling the professional what they're doing wrong.

Man! Those Huskies really turn the RPM's! Seems like a pretty aggressive chain too. I've always been a Stihl guy but that is a bad ass limbing saw.

I respect this. Man gotta have balls of steel to be up that high and trusting his skill to do important work while also proving internet crusaders wrong. What a champion

You can tell this worker knows what they're doing, because all the previous cuts have all landed in nearly the same place and orientation.

This man is an expert, I can’t even climb a tall ladder

Real man at work. fearless and focused. 👍

As an electrician, our jobs are notoriously difficult, but these guys are on a whole different level.

this is a job….this job is fucking horrifying oh my god- i couldn’t, i’d pass out… mad props to people who have physical labor jobs like this. they do so much for us, man. all the heavy lifting, life threatening challenges, all that.

I'm no expert... I've only chopped up trees after a hurricane but I can tell that this man is able to line up multiple logs like he did at the bottom... He looks like he's done this more than once. I'd hire him.

He definitely knows what he's doing

If he’s that high cutting trees, buddy definitely knows what he is doing.

You’re excellent man.

Don't forget about the guys on the ground working the ropes when needed. Every good climber needs a good rope man and they need to trust each other and communicate well.

I honestly don't know how any of these professionals could do their jobs, if it wasn't for experts on KZfaq setting them straight...

Absolutely textbook shelfwood and clean cuts.

It's easy to see why groundskeepers, namely tree trimmers is the most hazardous job in the country with more work caused deaths than law enforcement coming in at 19. These people are severely underpaid.

Perfect notch , only has a short controllable section to drop , he knows what he is doing ! Wish I had the guts to climb like that !

So satisfying to watch professionals of their field do their jobs

Also much props to my brother in video. Anyone in this line of work are a cut above.

This gives me an unprecedented amount of anxiety

This is what my son does for a living..I pray 🙏 every day, but he loves it especially, when he is with a good crew.

What Nelson fails to realize he is not cutting the tree from the ground. He’s doing it up in the air and as you can see he perfectly dropped it on top of the other piece’s of the tree already dropped.

It is way scarier than it looks. Lots of times when you top em' the tree shakes back and forth like a car antenna. Good job. Be safe bro.

looks to me like he knows what's Goin on. fuck the haters. you run it bud. respect from a steel fabricator.

The deeper wedge makes the trunk lean that's why he is cleaning and evening it all out to get the right lean. When he dose the back cut it's even all the way across the face and slow to allow Issac Newton to take over. %100 boss at his job

Didn't yell timber. How can he resist?

it even rolled to the other logs haha clean !

Bro has more faith in those straps than I do in God💀

Imagine becoming a proffessional in the social media and teaching actual professionals what they are doing wrong

My dad's been doing this for 40 years. Lol regarding safety he always says "Dying ain't living". Proud of ya dad.

I'm always impressed by these professionals.

Remember, always wear ear protection when listening to a video about chainsaws

I use to do this for a living. About 4 years ago. Kinda miss it but not really. And your notch was perfect. Specially for a tight fall like that.

One of the hardest things to do in a physical labor jobs is trust the equipment and tools to do what they’re supposed to without malfunction. I could barely go 30 ft up in a scissor lift without having an anxiety attack. Hats off to this guy

Never do that when the entire tree is above you. The weight could shift the wrong way.

In that situation a face/sink cut of up to 80% the diameter is perfectly fine and is usually the best option. He's not falling, he's dismantling. Totally different ballgame. Nicely done 👌

Shout going out to all the professionals doing a fantastic job, whatever it is. Where would we be without you.

It literally had the same length as the others on the ground. You know your having a good day when it hits the ground and rolls next to the others.

Once worked at a bike shop. I wasn't working there as a mechanic but ive built my own bikes and im plenty knowledgeable on everything to know how to do all the fun complicated stuff. Guy brings in a lower end bike for maintenance and i think he had an issue. Hybrid bike. Service tech(who happens to be the Service team Manager(SM), is helping him. Guy: "I'm trying to get this fixed." SM: "OK, great let's pop it in the stand and take a look." Guy: "OK, awesome" SM: "What have been your issues?" Guy: "well it has some weird rubbing in the brakes." Guy goes on to give out his own theories, some of which were possible others not so much. The SM at this point had figured out he had contamination on his brakes, what from he wasn't yet certain. He goes to tell the guy this and that he might need new pads and a new brake rotor and the Guy wasn't having any of it. Tells the SM he's wrong and told him a likely completely made up way to fix the issue. I say likely made up cause I couldn't figure out any correlation between what he said and the issue at hand. And apparently, neither could our SM. After some more conversation, guy just tells our SM to do what he's told. Eventually our SM told him that he could sand down the pads and rotor and use rubbing alcohol to clean them. And guy said, "Oh so like hand sanitizer?" After a moment of shock, SM told him "no, if you use hand sanitizer you will likely need completely new brakes. Which would be far more expensive." Guy eventually walked out of the store after telling SM he sucks at doing his job. I personally hope he ended up using hand sanitizer.

The critics amaze me. As someone who’s not a professional arborist but has had first hand experience cutting down large trees… this guy knows exactly what he is doing. Any little bit picks on the comments.. when you are an extremely experienced professional in any field.. you alter slight things to your style. There were no major safety violations or reckless actions. Oh and if people think guys don’t one hand a chainsaw on those trees all the time.. then you haven’t seen it done before. It’s common.

24 years an arborist, I might have taken a smaller wedge, and I would definitely have used my top handle. The large wedge takes away a lot of control when you make your hinge, because the hinge is shorter, and you have less back cut to use as leverage if you need to use a felling wedge to tip it.

His notch for a tight space is perfect . If the notch was smaller the tree would fall further out. If he was on the ground it would be different and similar. To reduce the kick back of the tree n dont come back to you . This guy is dope.

Been a tree climber for about 2 years now and trust me it’s definitely scary, especially when your ascending the tree your about to work in. However, after your first few cuts in which ever tree you’re in, you become much more confident and focused on what you’re doing (assuming everything is going smoothly). It’s a great feeling when you come down and see all the work you just did. I always take a few looks back at my work and think to myself, damn, I just did that :)

I mean, it's a deep notch, but the fibers on that tree seem to hold it up really well. Personally, i wouldn't risk it from lack of experience, but you seem to know what you're doing. Job well done!

I like how he positioned the ropes *below* the cut. You probably get just one chance to screw that up

The fact that people can retire from doing stuff like this without dying is a miracle on it’s on! Takes good people that never overlook the idea of “safety first”

Never knew a tree trunk could bear the weight of those ginormous balls

One of the hardest jobs i ever did! I always give mad respect to my fellow arborists! People truly don't realize how difficult that is. You're 100ft in a tree running a LETHAL piece of equipment trying to fell logs into very precise spots!

As a guy who does this everyday, you want a deep notch when flipping logs… cutting a deep notch, past the center of gravity, ensure the log will tip without having to push on it.

The way the chainsaw cuts like a hot knife in butter makes me so happy.

Larger, wider notch in order to minimize shock load on the tree by reducing the amount of holding wood. As the stem swings down, you finish the cut with minimal snapping of the holding wood. Good job.

Looks perfect great job

I just LOVE all these Social Media experts trying to tell the ACTUAL experts how to do their jobs. 🤣🤣🤣🤣

Yes, let’s tell a professional how to do their job.. cause that makes 100% sense

Man it takes some balls to do that job. I worked with a guy in construction that did this as a side job and he would put those spikey boots on and run up a giant tree in seconds. Shits wild man lol. And also you gotta be PERFECT with which way the limbs fall and everything- PERFECT, you got power lines in the way a lot of times and houses and cars and all that- it ain’t easy considering the layout of every tree is different- different weight distribution and everything.

Nothing cuts better than a good sharp chainsaw

What a crazy job. I'm so glad there's someone out there willing to do it.

He’s doing it one handed at the end. Dude knows what he’s doing for sure.

You need to hire a 16-year-old kid to yell TIMBER

That’s called knowing ur job well👍

There’s just absolutely no way. Salute to those who have this kind of bravery.

Was a damn good deep notch. Well done and perfect fall

Me, knowing nothing at all about this job: “Hmm, that notch seems okay to me…”

This is perfectly in line with what most pros do when the drop zone is tight and when felling from height. I am NO pro, but I can think of three reasons they choose to do this. The hinge is farther back so the log doesn't move as far forward as it falls. In addition, when tied to the tree you can't easily give it a push to get the fall started and I wonder if gusts of wind might make a log with less clear direction harder to start the drop. So a deeper notch allows a thicker hinge. Third, I wonder if a deep notch causes less lateral deflection of the spar as the log falls, reducing the sway that happens after the hinge breaks. Does anybody have any other remarks as to why deep notches are preferred by climbing arborists?

His skills are top notch

That Notch is beautiful.... I've always used a deep Notch for controlling the fall... it's not a harvest thing, so depth of a Notch can be as large as the faller chooses...

I do this as well, and as an arborist I will say that while iv had many close calls in the path to learning, trusting in your skills is key. It's the 3rd most dangerous job in the US, but once you understand it, it's far more fun than it is scary. Like a game. I love this work! Well done my brother! Stay safe

To the comments saying he is doing it wrong, he has all ready topped the tree ,he is cutting about 5 to 6 foot pieces coming down. Coming down like that is the best way to notch helps the piece fall with minimal effort and and if you notice it let’s it go away from the tree a little more. If cutting down a whole tree would not recommend cutting that deep, and he probably already knows that.

I’m an iron worker with no problems at height but I wished I learned this trade instead. the thrill and satisfaction these guy must experience has to be something else. The skill is next level!

Notch too deep? I’d say this man knows what he’s doing there was plenty of hinge left to control his drop I’d say near perfection

It's called an under mining cut. We use it for chunking wood and dropping select stems. It shifts the center of gravity and helps the piece flop easier. Not recommended if you need a hinge for control.

Well im an arborist myself and yes, its way to deep , he has no control over the tops, no hinge wood, , cuts with 1 hand... Uses 2 soft lines, and no way to get down quick... Dude seems like a cowboy to me, and i bet other is the game feel the same way.

Perfection! Every notch is slightly different to account for the drop height and rate of rotation. Look at where the 4th stick landed in relation to the other 3 sticks. No spear marks no errant bounce evident from the previous drop marks. Trigonometry professor with a side job.

It is alot harder than it looks, trust me...some people have skills, others don't, I took out the power of a whole block of homes once. It was an evergreen tree, started ok but I think the 3rd cut went haywire, almost killed myself, after that I gave up on being a climber. Ended up getting in the Ironworkers union, better pay and much safer for me anyway...

The deep notch also makes it so the log stays on the hinge longer and can make a full flip before it hits the ground. Nice work👌

The most Satisfying response I’ve seen in a long time. 😂

Learned this stuff when I was stuck using hand tools cuz under 18. It was a great way to stay in shape, and keep your wits about you. Gotta have your attention on like 50 things at once at a given moments notice. Only think that kept me from continuing once 18 was military. Love the work being done. Deep notches like this are for close fall cuts. Usually there are things you don't want getting hit by a piece of wood falling like a wrecking ball.

You could not pay me enough. This guy deserves a raise.

Poor Paulie got chased down by this dude 😖

I like the machines that tree companies use now. I had a tree removed in my yard a few months ago. The guy had a machine that was a grappler and chainsaw at the top of a crane. He would move the grappler next to a large branch, grab the branch, saw it off, and then place it carefully on the ground. The tree was huge and in between my house and the neighbor. Branches were hanging over both houses. He cut this 80 or 90 year old elm down, cut up the trunk and branches, and hauled it all away in just a few hours.

Tree work videos are fantastic educational tools… I don’t really understand why people feel the need to slag climbers off! Maybe they’re not the best gob cuts in the world but it worked. Maybe this chap found that out after watching the replay. I’m slowly learning how to climb properly from an absolute Professional and from a ground rigger to professional climbing is savagely brutal… physically, mentally, safety for yourself and others, trusting your main grounds man with your life. I’m not slagging people off but have a think before leaving nasty/negative comments as the person might actually read them and be offended and think too negatively about them.

“I’ve been a doctor for ten years. Why do I always have to remind people that I know what I’m doing?” - Dr. House

it’s amazing how you’re brave enough to have that job, I would be so scared of the tree falling the wrong way and right on top of me

It's simple physics, people. The further the notch goes past the center of the stem, the further the center of gravity is towards the front of the notch. This only works on straight up and down trees though. It's why you generally only see this notch technique used when climbers are chunking out big stems from the top down.

I could never do this job. Hats off to these guys and their gigantic brass balls

Who ever commented that the notch is too deep has never been up a tree or never chunked one down and landed the logs flat. I love peoples uneducated criticism.

Worked 35 yrs doing this sure miss it Good job dude.

Just seen comment on my comment. The reason for not going too deep with notch is on a tree that may be unbalanced one way or another, a deep notch might not leave enough meat on the backside for smooth felling and could break in a bad direction. Especially when over structures. You loose your insurance quickly with bad cuts. It is not so critical when chunking down straight pine log but just being consistent with your cuts will always reduce likelihood of error.

My ass thinking he's punching the tree like it's Minecraft.

The deep notch gives better control, especially when you have no escape.